This is online ebooks pdf download information about simple guide Installation Manual Ford Focus Ipod. if you want to connect your ipod gadget to your Ford car you must read this manual book. Purpose for the owner and mechanic this book will tell us easy step by step. This section pertains to Ford Focus car which do not have a factory installed satellite receiver. To install the iPod Adapter you will need to access the back of the OEM radio in your vehicle. Specific instructions for removing the trim in your vehicle are included in this guide. If you are not confident that you can safely remove your interior trim to perform the installation, contact your dealer or a competent mechanic for assistance.
You should be installing you Brand motion iPod Adapter into a Ford Focus with an OEM radio that is similar to this picture. Radio Removal Instructions: 1) Remove panel by snapping of trim cover. 5) Disconnect A/C controls 2) Remove four 7mm screws holding radio in place. 3) Remove radio from cavity 4) Disconnect radio connectors from radio and set radio aside. 6) Connect Brand motion Vehicle Harness to vehicle using both the 16 pin and 24 pin connector (note if your vehicle does not have a 16 pin harness the unit will work as long as the radio has the female 16 pin connector on the back of the unit). The part number of the radio verifies that your particular vehicle has the 16 pin female connector on the back of the radio.
"We do our best to publish and share Non Copyrighted Material on this blog, We merely take the power of Google Search(pdf search), forums, social bookmarks to find those materials and link to it. None of those materials are hosted in this server. We are neither affiliated with authors of any site nor responsible for its content and change of content. If you see unrelated pdf files with the description or copyrighted materials published on this blog, please contact us, we'll take action as soon as possible. Please read our Disclaimer for more detail."